Data Bus
Looking for reliable industrial IoT data bus protocols? Our advanced embedded system communication hardware supports I2C, SPI, and UART / RS-485 / RS-232 interfaces. From basic digital logic gates to complex Arithmetic Logic Units (ALU) and JK flip-flops, verification signal data.
ARITHMETICAL LOGIC Protocol Analysis for Logic Circuit
The ARITHMETICAL LOGIC Bus Module of Zeroplus Logic Analyzer can help users start the relative...
DIGITAL LOGIC Protocol Analysis for Logic Circuit
It is said that the digital logic gate is the basic member in the digital signal. For example,...
I2C Protocol Analysis for ICs
I2C (Inter Integrated Circuit) Protocol Analyzer is the kind that is used in electron and circuit...
I3C Protocol Analysis for ICs
MIPI I3C is widely adopted in mobile, IoT, and automotive electronics for consolidating sensors...
JK FLIP-FLOP Protocol Analysis for Circuit
The JK FLIP-FLOP is mainly applied in the control of the digital signal. It changes the connection...
Automated Logic Analysis Applications Using Python and ZP-Logic Software
In today’s high-speed digital development environment, traditional manual measurement has become...
SPI Protocol Analysis for Ics
SPI (Synchronous Peripheral Interface) is a 4-wire Protocol Analyzer which communicates by Master-Slave...
UART (RS-232C / 422 / 485) Protocol Analysis for Ics
UART (Universal Asynchronous Receiver / Transmitter) is an asynchronous transmitting and receiving...
Decoding the Serial Buses on an Embedded Board
Firmware debugging usually involves the same few serial links between a controller and its peripherals. This group covers I2C, I3C, SPI and UART (RS-232C/422/485), where decoding turns waveforms into addresses, commands and data instead of edges counted by hand. On LAP-F1 models, I2C, SPI and UART are also hardware trigger protocols.
The group also includes logic-circuit analysis for digital logic gates, arithmetic logic and JK flip-flops, used in circuit verification, system testing and teaching. When selecting an analyzer, list the buses on your board, how many need to be captured together and whether a hardware trigger on a specific packet is a requirement; those three points narrow the choice between LAP-C, LAP-C Pro and LAP-F1.









