I2S Protocol Analysis for Audio
I2S (Inter-IC Sound Protocol Analyzer or Integrated Interchip Sound) is a Protocol Analyzer designed by Philips for digital audio devices for transmitting stereo audio between devices, it is used to transmit the PCM sound of a CD to the DAC of CD player. The I2S of Philips regulates the standard of interface and format of digital audio data; Because I2S transmits data and frequency separately (similar to I2S, dividing SDA and SCL), which can reduce the distortion. I2S only deals with sound data; other signals (for example control signals) must transmit solely. In order to reduce the output pin as soon as possible, I2S only uses three IC pins; they are SDATA, Field/ LRCK and SCLK.
With Zeroplus logic analyzers and I2S protocol analysis capability, engineers can capture, decode, and interpret I2S signals more efficiently for digital audio interface debugging, DAC communication analysis, and embedded audio system validation.
Function Introduction
Except for the three pins in the wire of hardware, I2S has three different transmission modes, they respectively are Normal, DMA and transmitted and received mode. SCLK is also called BCLK, which is used to correspond to every bit of data sound. SCLK's Frequency = 2 X Sampling Frequency X Sampling Bit. LRCK is used to switch data of left and right audio channels, LRCK = 1 denotes transmitting data of left audio channel, to the contrary, LRCK =0 denotes transmitting data of right channel; LRCK’s frequency is equal to sampling frequency. SDATA denotes audio data in Binary. With the development of I2S, Until now, it has several different data format, according to the differences among SDATA, LRCK and SCLK, it produces flush left format (fewer), I2S format(defined by Philips and flush right (called Japanese format or general format), before it depend on high price audio analyzer to analyzing I2S signal, now it only need logic analyzer to help user analyze signal.
- BUS Line: SCLK, LRCK, SD
- Frequency: 100K ~ 5MHz
- Voltage: 2.0V and 2.4V
- Area of Project Application: Digital Audio
- Gallery
- Download
-
40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement...
Details64-Channel Synchronous Logic Analyzer
LAP-F164064 | FM00002619
Harnessing a 64-channel synchronous monitoring core, this system supports internal timing sampling...
Details64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel...
Details16-Channel Entry-Level High-Performance Logic Analyzer
LAP-C Pro 16064M | FM00007890
The 16-Channel High-Performance Logic Analyzer is ideal for digital development tasks requiring...
Details32-Channel High-Performance Logic Analyzer
LAP-C Pro 32064M | FM00007893
The 32-Channel High-Performance Logic Analyzer is ideal for digital system verification tasks...
Details32-Channel Advanced High-Performance Logic Analyzer
LAP-C Pro 32128M | FM00007896
The 32-Channel Advanced High-Performance Logic Analyzer is ideal for development and verification...
Details32-Channel Flagship High-Performance Logic Analyzer
LAP-C Pro 32256M | FM00007899
The 32-Channel Flagship High-Performance Logic Analyzer is ideal for advanced development environments...
Details16-Channel Standard Logic Analyzer
LAP-C 16064 | FM00000118
The 16-channel standard logic analyzer is ideal for daily debugging needs such as microcontroller...
Details16-Channel Enhanced Logic Analyzer
LAP-C 16128 | FM00000116
The 16-channel enhanced logic analyzer is designed for embedded development, digital debugging,...
DetailsProCision System Stability Analyzer
FM00011874
The ProCision is a high-density system stability analyzer engineered to replace limited 4-channel...
DetailsGetting I2S Data Formats Right
I2S carries stereo audio on three lines: SCLK (bit clock), LRCK (left/right select) and SD (data). Data may follow the I2S, left-justified or right-justified format, and decoding with the wrong format shifts every sample, so the format must be known before the capture is read. A misread LRCK edge can also make left and right samples appear swapped.
The Zeroplus I2S decoder configuration sets the data format before the three lines are decoded. On LAP-F1 models, I2S is one of the six hardware trigger protocols, which helps when a fault occurs on particular audio data. For selection, compare the bit clock with the analyzer's sample rate and confirm the sample rate and word length used in your design.










