Philips RC-5 Protocol Analysis for IR
RC5 Infrared Remote Control Format, developed by Philips, is a kind of infrared remote control signal protocol. Although Philips has developed a more comprehensive RC6 Standard, most electronic products of Philips still utilize the RC5 Infrared Remote Control Format at present, and it can switch with the NEC Infrared Remote Control Format. With Zeroplus logic analyzers and Philips RC-5 analysis capability, engineers can capture, decode, and interpret infrared packets and baud rate settings more efficiently for remote-control device validation, signal debugging, and home appliance control analysis.
Function Introduction
Protocol Analyzer Philips RC-5 Decoding Module of Zeroplus Technology can analyze the packets in the Transmission Control Signal of Philips RC-5, such as S1, S2, T0, T1, ADDRESS and COMMAND. In the Protocol Analyzer Philips RC-5 Decoding Module of Zeroplus Technology, the packets in the signal can be displayed with the graphical mode, which can improve the working efficiency and save the time of calculating the decoding by hand. At the same time, Protocol Analyzer Philips RC-5 Decoding Module of Zeroplus Technology can judge the Baud Rate in the signal automatically, which is convenient for analyzing the signal.
- Channel Name: Philips RC-5
- Frequency: RX: 562.5Hz / TX: 36KHz
- Application Field: IR Remote Control
- Gallery
- Download
-
40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement...
Details64-Channel Synchronous Logic Analyzer
LAP-F164064 | FM00002619
Harnessing a 64-channel synchronous monitoring core, this system supports internal timing sampling...
Details64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel...
Details16-Channel Entry-Level High-Performance Logic Analyzer
LAP-C Pro 16064M | FM00007890
The 16-Channel High-Performance Logic Analyzer is ideal for digital development tasks requiring...
Details32-Channel High-Performance Logic Analyzer
LAP-C Pro 32064M | FM00007893
The 32-Channel High-Performance Logic Analyzer is ideal for digital system verification tasks...
Details32-Channel Advanced High-Performance Logic Analyzer
LAP-C Pro 32128M | FM00007896
The 32-Channel Advanced High-Performance Logic Analyzer is ideal for development and verification...
Details32-Channel Flagship High-Performance Logic Analyzer
LAP-C Pro 32256M | FM00007899
The 32-Channel Flagship High-Performance Logic Analyzer is ideal for advanced development environments...
Details16-Channel Standard Logic Analyzer
LAP-C 16064 | FM00000118
The 16-channel standard logic analyzer is ideal for daily debugging needs such as microcontroller...
Details16-Channel Enhanced Logic Analyzer
LAP-C 16128 | FM00000116
The 16-channel enhanced logic analyzer is designed for embedded development, digital debugging,...
DetailsProCision System Stability Analyzer
FM00011874
The ProCision is a high-density system stability analyzer engineered to replace limited 4-channel...
DetailsReading RC-5 Remote-Control Fields
RC-5 is the Philips infrared remote-control format, one of three infrared decoder options from Zeroplus. The RC-5 decoder is specified for a 36KHz transmit carrier. Each transmission carries two start bits, a toggle bit, an address and a command; the toggle bit changes with each new key press, which lets a receiver tell a held key from a repeated press.
The Zeroplus RC-5 decoder labels S1, S2, T0, T1, address and command, and sets the baud rate automatically, so receiver testing needs no manual configuration. Repeated or mis-addressed commands become easy to spot. When testing a complete appliance board, capture the receiver output together with the control lines it drives. For the newer Philips format, see RC-6 decoding; one analyzer can decode both.










