Infrared, Access Control and RF Interface Analysis

Infrared and RF control protocol analysis for remote, reader and RF testing

Integrating RC-5/RC-6, Wiegand access control, 5G RF front-end MIPI RFFE, and Ethernet MII signal validation.

Wireless & IR

This domain features comprehensive protocol analysis tools for MIPI RFFE, which is critical for Internet of Things (IoT) Radio Frequency (RF) applications, alongside the Wiegand access control reader interface essential for intelligent security systems, and Ethernet Media Independent Interface (MII, MAC/PHY) communications driving networking equipment infrastructure. Concurrently, the architecture delivers high-precision decoding and analysis for Philips RC-5/RC-6 and NEC PD6122 infrared signaling protocols.


Wireless & IR

  • Display:
Result 1 - 6 of 6
MII Protocol Analysis for Ethernet - Area of project application: Ethernet system interface.
MII Protocol Analysis for Ethernet

The MII is one of the interfaces in the IEEE802.3U of the Ethernet Technology Specifications,...

MIPI RFFE Protocol Analysis for RF Control - Area of project application: Open standards and a specification for mobile display, multimedia, and data transfer interfaces.
MIPI RFFE Protocol Analysis for RF Control

MIPI RFFE is a dedicated communication protocol for controlling RF front-end components in mobile...

NEC PD6122 Protocol Analysis for IR - Area of project application: Infrared ray.
NEC PD6122 Protocol Analysis for IR

NEC PD6122 is the most common Communication or Control Method. Because the Infrared Control...

Philips RC-5 Protocol Analysis for IR - Application Field: IR Remote Control.
Philips RC-5 Protocol Analysis for IR

RC5 Infrared Remote Control Format, developed by Philips, is a kind of infrared remote control...

Philips RC-6 Protocol Analysis for IR - Application Field: IR Remote Control
Philips RC-6 Protocol Analysis for IR

RC6 Infrared Remote Control Format, developed by Philips, is a new infrared remote control...

WIEGAND Protocol Analysis for Sensor Card - Application Field: Contactless IC Card Reader.
WIEGAND Protocol Analysis for Sensor Card

WIEGAND is used for the Contactless Card Reader, such as Access Sensing Card, Security Systems...

Result 1 - 6 of 6

Control Signals Around Wireless Devices

Many wireless and remote-control products are debugged through the control signals around the radio rather than the radio itself. Decoder options cover infrared remote control with NEC PD6122, Philips RC-5 and Philips RC-6; access control with Wiegand card-reader data; and RF front-end control with MIPI RFFE.

The group also lists the Ethernet MII interface between MAC and PHY, which can be tapped with the Ethernet module; check module compatibility with your analyzer model. Infrared and Wiegand signals use one or two lines, so channel count is rarely the constraint. Selection usually depends on which other system signals must be captured alongside them and, for RFFE, on the control clock rate of your design.