UART (RS-232C / 422 / 485) Protocol Analysis for Ics
UART (Universal Asynchronous Receiver / Transmitter) is an asynchronous transmitting and receiving interface and it was used very widely in PCs such as Computer’s Modem, Printer and so on. Until now, we still can find UART signals applied in auto control devices and electronic products, for example RS-232、RS-422 and RS-485.
With Zeroplus logic analyzers and UART protocol analysis capability, engineers can capture, decode, and interpret UART signals more efficiently for industrial control, PLC, and embedded system communication debugging.
UART Analysis Function Introduction
After turning on the UART bus auto-coding function, engineers can learn the transmitted data clearly. At the same time, in UART analytic configuration, user can select one test signal, it is TX or RX; or user can select two signals at the same time, they are TX and RX; user also can select Baud Rate, Data Bit, Data Direction, Parity Check, Stop Bit, Whether reserve the data level for decoding, and Bus Color.
- Bus Line: Tx / Rx
- Frequency: Unstable
- Voltage: 24V
- Area of Project Application: Electronic communication
- Gallery
- Download
-
40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement...
Details64-Channel Synchronous Logic Analyzer
LAP-F164064 | FM00002619
Harnessing a 64-channel synchronous monitoring core, this system supports internal timing sampling...
Details64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel...
Details16-Channel Entry-Level High-Performance Logic Analyzer
LAP-C Pro 16064M | FM00007890
The 16-Channel High-Performance Logic Analyzer is ideal for digital development tasks requiring...
Details32-Channel High-Performance Logic Analyzer
LAP-C Pro 32064M | FM00007893
The 32-Channel High-Performance Logic Analyzer is ideal for digital system verification tasks...
Details32-Channel Advanced High-Performance Logic Analyzer
LAP-C Pro 32128M | FM00007896
The 32-Channel Advanced High-Performance Logic Analyzer is ideal for development and verification...
Details32-Channel Flagship High-Performance Logic Analyzer
LAP-C Pro 32256M | FM00007899
The 32-Channel Flagship High-Performance Logic Analyzer is ideal for advanced development environments...
Details16-Channel Standard Logic Analyzer
LAP-C 16064 | FM00000118
The 16-channel standard logic analyzer is ideal for daily debugging needs such as microcontroller...
Details16-Channel Enhanced Logic Analyzer
LAP-C 16128 | FM00000116
The 16-channel enhanced logic analyzer is designed for embedded development, digital debugging,...
DetailsProCision System Stability Analyzer
FM00011874
The ProCision is a high-density system stability analyzer engineered to replace limited 4-channel...
DetailsDecoding an Asynchronous Serial Link
UART has no shared clock, so the receiver depends on agreed baud rate, data bits, parity and stop bits; a mismatch in any of them produces framing errors that look like corrupted data. The Zeroplus UART decoder can follow TX, RX or both, with baud rate, data bits, data direction, parity, stop bits and bus colour set in the configuration options.
On LAP-F1 models, UART (RS-232C/422/485) is one of the six hardware trigger protocols, which helps isolate a rare message. For a known reference signal when setting up the decoder, the Protocol Simulator Board 1 outputs UART traffic. For selection, confirm the line standard and baud rate, and how many other control signals must be captured with the serial lines.










