CCIR656 Protocol Analysis for Optoelectronics
CCIR656 is also called ITU-RBT656, and we can say it is one kind of transmission mode, mainly applied in standard of transmission between digital video and film equipment(27MHz/s or 243MHz/s). CCIR656 use NRZ to code and adopt simple unilateral sampling, what is more, for CCIR601, no need to use two simultaneous signals (HSYNC and VSYNC), Generally speaking, it only use 8 signals (CCIR656 = CCIR601 + HSYNC + VSYNC + BLANK).
With Zeroplus logic analyzers and CCIR656 analysis capability, engineers can capture digital video data, verify synchronization signals, and interpret color information more efficiently for video module integration, interface validation, and display system debugging.
Function Introduction
CCIR656 bus consists of 8bits/10bits data line and one frequency signal line (CLK), all package decode are sampled when CLK is at rising edge, support two ranges (720 x 460 and 720 x 576), and also support scanning of common video and signal bus and transmission of HSYNC、VSYNC、BLANK. Bus data contents mainly consists of Y,Cr,Cb, Y means lightness, Cr means red, Cb means blue, transmission form begin with 4 bits SAV CODE, then Y,Cr,Cb, EAV CODE become free after it ends CCIR656 bus analysis module enable engineers to improve work efficiency while they do signal analysis work, In modern digital times, more and more signals are transited in digital mode. The special bus analysis module of Zeroplus LAP enables engineers to choose more conveniently when they do digital signal analysis, and it also can display data, address, status of signals in the mode of pictures, then engineers can get analysis results faster, therefore shorten development time and improve work efficiency.
- Bus Line: CLK, DB0 ~ DB9
- Frequency: 27MHz
- Voltage: 4.6V
- Area of Project Application: LCD/CRT Monitor or TV
- Note: Signal Require Higher Sample Rate, Not Support on LAP-C(16032) / (16064)
- Gallery
- Download
-
40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement...
Details64-Channel Synchronous Logic Analyzer
LAP-F164064 | FM00002619
Harnessing a 64-channel synchronous monitoring core, this system supports internal timing sampling...
Details64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel...
Details16-Channel Entry-Level High-Performance Logic Analyzer
LAP-C Pro 16064M | FM00007890
The 16-Channel High-Performance Logic Analyzer is ideal for digital development tasks requiring...
Details32-Channel High-Performance Logic Analyzer
LAP-C Pro 32064M | FM00007893
The 32-Channel High-Performance Logic Analyzer is ideal for digital system verification tasks...
Details32-Channel Advanced High-Performance Logic Analyzer
LAP-C Pro 32128M | FM00007896
The 32-Channel Advanced High-Performance Logic Analyzer is ideal for development and verification...
Details32-Channel Flagship High-Performance Logic Analyzer
LAP-C Pro 32256M | FM00007899
The 32-Channel Flagship High-Performance Logic Analyzer is ideal for advanced development environments...
Details16-Channel Standard Logic Analyzer
LAP-C 16064 | FM00000118
The 16-channel standard logic analyzer is ideal for daily debugging needs such as microcontroller...
Details16-Channel Enhanced Logic Analyzer
LAP-C 16128 | FM00000116
The 16-channel enhanced logic analyzer is designed for embedded development, digital debugging,...
DetailsProCision System Stability Analyzer
FM00011874
The ProCision is a high-density system stability analyzer engineered to replace limited 4-channel...
DetailsDecoding Embedded-Sync CCIR656 Video
CCIR656 (ITU-R BT.656) carries video on a data bus plus clock, with synchronisation embedded as SAV and EAV codes instead of separate sync lines, so a missing code shifts the whole picture. The decoder reads CLK and DB0 to DB9 and displays SAV codes, Y, Cr and Cb data, EAV codes and HSYNC, VSYNC and BLANK states for 720 x 460 and 720 x 576 formats.
The decoder is specified for 27MHz, and because the signal needs a higher sample rate, model compatibility is limited: it is not supported on LAP-C 16032 or 16064. For selection, confirm the video clock and data width in your design and choose a model with enough sample-rate headroom.










