PMBus 1.1 Protocol Analysis for Power Management
The basis of the PMBus 1.1 (Power Management) is similar to that of SBS; both of them utilize the Basic Command and Data to manage the power; the operation is simple and reliable, and doesn't need the complex Operation Communication Protocol. PM can be divided into two parts: Part1 – General Requirements, Transport and Electrical Interface; Part II – Command Language.
When the specifications are divided into two parts, modifying any part of them won’t affect the other part; it strengthens the flexibility of the Power Management for PMBus 1.1. At present, the PMBus 1.1 has received support from Artesyn Technologies, Astec / Emerson Network Power, Intersil, Microchip, Summit, Microelectronics, TI, Volterra Semiconductor and Zilker Labs Inc.
With Zeroplus logic analyzers and PMBus 1.1 analysis capability, engineers can capture power management packets, decode commands, and verify PEC more efficiently for digital power supply validation, power conversion control, and system debugging analysis.
Function Introduction
The transmission of the Protocol Analyzer PMBus 1.1 needs two signal channels, which are SDA and SCK. The Transmission Frequency is from 10KHz to 400KHz. The different statuses of Packets of Protocol Analyzer PMBus 1.1 can be displayed on LA with the Graphic Mode according to the Protocol Analyzer PMBus 1.1 Decoding Function of Zeroplus Technology, including START, ADDRESS, WRITE, READ, COMMAND, BYTE_COUNT, DATA, PEC, STOP and so forth. PEC is a kind of debugging mechanism of Protocol Analyzer PMBus 1.1, which adopts the CRC8 Calculation Mode to verify the Data Transmission of the Signal. What's more, the Protocol Analyzer PMBus 1.1 Decoding Module of Zeroplus Technology can also display this kind of CRC, which will supply a quicker and more convenient Decoding Tool for users.
- Bus Line: PMDAT, PMCLK
- Frequency: 400KHz
- Voltage: Define by IC
- Area of Project Application: Power Management
- Gallery
- Download
-
40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement...
Details64-Channel Synchronous Logic Analyzer
LAP-F164064 | FM00002619
Harnessing a 64-channel synchronous monitoring core, this system supports internal timing sampling...
Details64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel...
Details16-Channel Entry-Level High-Performance Logic Analyzer
LAP-C Pro 16064M | FM00007890
The 16-Channel High-Performance Logic Analyzer is ideal for digital development tasks requiring...
Details32-Channel High-Performance Logic Analyzer
LAP-C Pro 32064M | FM00007893
The 32-Channel High-Performance Logic Analyzer is ideal for digital system verification tasks...
Details32-Channel Advanced High-Performance Logic Analyzer
LAP-C Pro 32128M | FM00007896
The 32-Channel Advanced High-Performance Logic Analyzer is ideal for development and verification...
Details32-Channel Flagship High-Performance Logic Analyzer
LAP-C Pro 32256M | FM00007899
The 32-Channel Flagship High-Performance Logic Analyzer is ideal for advanced development environments...
Details16-Channel Standard Logic Analyzer
LAP-C 16064 | FM00000118
The 16-channel standard logic analyzer is ideal for daily debugging needs such as microcontroller...
Details16-Channel Enhanced Logic Analyzer
LAP-C 16128 | FM00000116
The 16-channel enhanced logic analyzer is designed for embedded development, digital debugging,...
DetailsProCision System Stability Analyzer
FM00011874
The ProCision is a high-density system stability analyzer engineered to replace limited 4-channel...
DetailsPMBus Commands and PEC Checks
PMBus controls digital power supplies with a command language, defined in the PMBus specification, on the PMDAT and PMCLK lines. It builds on SMBus, which is itself based on I2C. Each transfer can end with a Packet Error Code (PEC), a CRC-8 value, so a failed transfer can come from corruption or from a wrong command.
The Zeroplus PMBus 1.1 decoder displays start, address, write, read, command, byte count, data, PEC and stop, including the PEC value, so corrupted transfers can be separated from wrong commands during supply testing. For selection, list the regulators and control lines that must be captured together; that count decides the analyzer configuration.










