I2C Protocol Analysis for ICs
I2C (Inter Integrated Circuit) Protocol Analyzer is the kind that is used in electron and circuit systems, it is usually used as a signal format to communicate between device and device. I2C is a synchronous transmission; a group of I2C has two groups of pins ,they are SCL and SDA,and the I2C signal content includes Start, Address, Command. Data, Read/Write, ACK/NACK and Stop.
With Zeroplus logic analyzers and I2C protocol analysis capability, engineers can capture, decode, and interpret I2C signals more efficiently for embedded system debugging and EEPROM communication verification.
I2C Analysis Function Introduction
Before turning on the I2C Protocol Analyzer coding function, the data and waveform tested by Logic Analyzer is almost the same to that of oscillograph, however, when the I2C auto-coding function is turned on,user only need give the complicated data to software to code, and need not code by them.And the I2C function setup of software can set to the test signal, such as data length, font coding mode, and soon.
- Bus Line: SDA、SCK
- Frequency: 800KHz
- Voltage: 5V
- Area of project application: Electronic communication.
- Gallery
- Download
-
40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement...
Details64-Channel Synchronous Logic Analyzer
LAP-F164064 | FM00002619
Harnessing a 64-channel synchronous monitoring core, this system supports internal timing sampling...
Details64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel...
Details16-Channel Entry-Level High-Performance Logic Analyzer
LAP-C Pro 16064M | FM00007890
The 16-Channel High-Performance Logic Analyzer is ideal for digital development tasks requiring...
Details32-Channel High-Performance Logic Analyzer
LAP-C Pro 32064M | FM00007893
The 32-Channel High-Performance Logic Analyzer is ideal for digital system verification tasks...
Details32-Channel Advanced High-Performance Logic Analyzer
LAP-C Pro 32128M | FM00007896
The 32-Channel Advanced High-Performance Logic Analyzer is ideal for development and verification...
Details32-Channel Flagship High-Performance Logic Analyzer
LAP-C Pro 32256M | FM00007899
The 32-Channel Flagship High-Performance Logic Analyzer is ideal for advanced development environments...
Details16-Channel Standard Logic Analyzer
LAP-C 16064 | FM00000118
The 16-channel standard logic analyzer is ideal for daily debugging needs such as microcontroller...
Details16-Channel Enhanced Logic Analyzer
LAP-C 16128 | FM00000116
The 16-channel enhanced logic analyzer is designed for embedded development, digital debugging,...
DetailsProCision System Stability Analyzer
FM00011874
The ProCision is a high-density system stability analyzer engineered to replace limited 4-channel...
DetailsWhat the I2C Decoder Shows
I2C problems usually appear as a missing acknowledgement, a wrong address or a read that returns unexpected data. The bus uses two lines, SDA for data and SCL for clock, and the Zeroplus I2C decoder labels the start condition, address, command, read/write bit, data, ACK/NACK and stop on the waveform. Decoder configuration options such as data length can be set to match the device.
On LAP-F1, I2C is one of six hardware trigger protocols, so a capture can start on a decoded event rather than a raw edge; this matters when a fault appears only occasionally. For model selection, compare the I2C clock rate with the analyzer's sample rate and decide whether hardware triggering is a requirement. To generate I2C traffic for testing, see the I2C-SPI Control Center.










