Support Hub
To help you accelerate your debugging workflow, we have compiled this FAQ regarding our after-sales support. Whether you are troubleshooting high-speed signals or integrating complex protocol decoders, our resources are designed to support your success. If you have any other needs, please feel free to contact our technical and business teams for further consultation.
Q: What is the warranty period for the logic analyzer?
A: We provide a 2-year standard warranty. Post-warranty repair services are available to ensure long-term reliability for your R&D projects, with a nominal fee for components and labor.
Q: Does the logic analyzer require an external power supply?
A: The LAP-C Pro can be powered directly via the USB port. The LAP-F1 series requires an external power adapter.
Q: Can a logic analyzer directly measure differential signals?
A: Standard logic analyzers are designed for Single-Ended signals (measuring voltage relative to a 0V ground). For high-voltage (CMOS/TTL) differential signals, you can analyze the signals separately. For low-voltage differential signals (LVDS), a dedicated P200LVDS differential probe is required.
Q: Is the memory depth fixed per model? Can I increase memory when using fewer ports?
A: Each model comes with a fixed total memory capacity. However, both LAP-C Pro and LAP-F1 feature Memory Folding. By reducing the active channel count by half, you can double the memory depth per channel.
Q: Why are some channels missing in the LAP-C Pro software interface?
A: The software features an Automatic Folding Mechanism. If you set a memory depth that exceeds the single-channel limit, the software automatically reduces the channel count. Please lower your memory settings to restore full channel availability.
Q: Why are data captures unstable or noisy?
A: Signal integrity issues often stem from the connection. To prevent signal noise interference, ensure you use the original USB cable. We recommend connecting directly to the PC’s USB port; avoid low-quality USB hubs or long extension cables that may cause voltage drops or EMI.
Q: My LAP-C Pro usually works fine, but why is it suddenly losing signal after connecting the test cable?
A: Note that there is space between the edges of A0 and A1 on the LAP-C Pro. Please check if the test cable is misaligned.
Q: Why does the "This function needs to be used with USB3.0" error appear on my LTR mode?
A: This is usually a temporary handshake error. Simply unplug and reconnect the power adapter to reset the USB 3.0 controller and restore functionality.
Q: Why can't I open certain saved project files?
A: This is often due to Windows file path limitations. If the total length of the directory path and filename exceeds 230 characters (English) or 115 characters (Double-byte/Chinese), Windows cannot access the file. Move your files to a shorter directory path (e.g., C:\Projects).
Q: Can I replace the original testing leads with standard wires?
A: While technically possible, we strongly recommend using the original cables included with the instrument. Our leads ensure sufficient data accuracy.
Q: What is a Trigger Condition in a logic analyzer?
A: A Trigger Condition is a user-defined state or event (such as a Rising Edge, Falling Edge, or specific Bus Pattern) that tells the analyzer when to start capturing data.