Protocol Analyzer Bus Expert II (eMMC + SD3.0)
FM00006417
eMMC / SD Specialized Measurement
Bus Expert II is a specialized solution for eMMC and SD 3.0 analysis, boasting a massive 2G memory depth per channel (32 channels total). By integrating advanced active probe technology, it achieves continuous, lossless recording and superior signal restoration. The industry-exclusive unified PA/LA software architecture empowers engineers to flexibly toggle between timing validation and data packet analysis, drastically optimizing the processing of large-scale datasets. With a portfolio of 198 international patents, Zeroplus remains the premier PC-based authority in Taiwan, delivering high-performance debugging tools tailored for automotive electronics, IC design, and embedded system R&D.
SD Card Batch Compatibility & Boot Failure Analysis
The operating system (OS) of a display-integrated device is hosted on an SD card. During the production phase, a 2% failure rate was identified within the same batch of SD cards, where certain units failed to boot. The client provided both Good and NG (No-Go) samples for comparative analysis. The goal was to utilize a logic analyzer to determine if the compatibility issue stemmed from software protocol conflicts or hardware physical characteristics.
Solution & Methodology

β Protocol Layer Comparison (PA Mode): Using the Bus Expert II (BE II) in Protocol Analysis (PA) Mode, we recorded the entire boot-loading sequence. By exporting and comparing data from Good and NG cards, we identified intermittent Data CRC Errors occurring during data transmission on the NG samples.
β Physical Layer Deep-Dive (LA Mode): We then switched to Logic Analysis (LA) Mode to observe high-speed signal waveforms. The analysis revealed that the NG cards suffered from insufficient Setup Time, causing sampling point offsets and subsequent bit errors.
Final Resolution: The issue was resolved by optimizing the host-side firmware timing, significantly enhancing SD card compatibility and ensuring stable boot performance across all batches.
Data Integrity Verification for Large-Scale SD/eMMC Transfers
The Challenge: Identifying Mid-to-Late Stage Data Corruption
During continuous, large-scale data transfers (exceeding 10 minutes) on SD or eMMC storage, products occasionally encounter data corruption or write errors. Because these failures occur in the latter stages of massive data streams, traditional logic analyzer sampling depths are insufficient. This makes it extremely difficult for engineers to pinpoint the exact timestamp and physical location of the anomaly.
The Solution: BE II Advanced Monitoring & Cross-Verification

β Lossless Long Time Record (LLTR): We utilized the LLTR (Lossless Long Time Record) feature of the Bus Expert II, combined with Protocol Analysis (PA) Mode, to monitor the entire file-copying process. To facilitate tracking, binary files with specific Data Patterns (e.g., 0xF0F0 or 0x55AA) were used for the write tests.
β Cross-Verification & Fault Localization: Upon detecting corrupted files on the storage device, we used WinHex to inspect the absolute sector address on the drive. This data was then cross-referenced with the precise transmission logs captured by the BE II PA Mode.
Results & Conclusion: This methodology allowed the engineering team to determine whether the error originated during the host-side transmission or within the internal Flash memory write cycle of the eMMC/SD card. These findings provided the critical data needed for subsequent firmware patches or hardware design modifications.
Features
- 32-Channel Independent Architecture: Equipped with a dedicated hardware structure and a massive 2GB memory depth per channel.
- Next-Gen Active Probes: Features superior impedance matching and crosstalk reduction, supporting DUTs (Device Under Test) up to 200MHz.
- Continuous Long-Term Recording: Supports lossless, uninterrupted signal capture with direct data streaming and storage to local devices.
- Exclusive PA/LA Hybrid Mode: Seamlessly switch between Protocol Analysis (PA) and Logic Analysis (LA) for simultaneous timing verification and deep packet analysis.
- Professional Software Interface: Enables direct viewing and advanced searching of bus data, effortlessly handling massive datasets.
- 198 International Patents: Leveraging decades of innovation to provide global engineers with a high-speed, flawless debugging experience.
- HS400 Mode Support: Compatible with 1/4/8-bit data formats, delivering unparalleled precision in digital measurement.
- 100% Signal Capture: Powerful lossless long-term recording ensures zero data loss, with high-capacity storage capability.
- Advanced Search & Statistics: Built-in CMD Sort/List functions, supporting 3-level event triggering and advanced CRC error diagnostics.
Applications
- Mobile Devices & Consumer Electronics: Performance optimization and stability testing for internal storage (eMMC) in smartphones, tablets, and wearable devices.
- Embedded Systems R&D: System boot sector debugging for Industrial PCs (IPC) and IoT Gateways utilizing SD/eMMC as the primary boot medium.
- Automotive Electronics: Big data caching and read reliability verification for In-Vehicle Infotainment (IVI) systems and Advanced Driver Assistance Systems (ADAS).
- Semiconductor & IC Design: Logic timing verification and protocol compliance analysis for memory controllers.
- Imaging & Surveillance Image Processing & Surveillance: Hardware development for high-definition cameras and 4K surveillance systems requiring high-speed SD 3.0 write stability.
- Cloud Servers & Edge Computing: Signal Integrity (SI) analysis and continuous 24/7 operational monitoring for storage modules.
Specifications
| Operation System | Win 8.1 / Win 10 / Win 11 |
| Interface | USB 3.0 |
| Sample Rate | 5MHz - 2GHz |
| Total Memory | 64 Gbits |
| Memory Depth per Channel | 2Gb |
| Trigger Events | Pattern / Edge |
| Trigger Level | 48 |
| eMMC Event Trigger | YES |
| Lossless Long Time Record | YES |
| Segment Record | no |
| MicroScope | no |
| Probe / Offset Control | P300ST with Auto Calibration |
| Probe / Voltage of DUT | 1.2V / 1.8V / 3.3V |
| Features | Logic Analyzer (LA) / Protocol Analyzer (PA) / PA with Long Time Record |
| Note | Support: SD 3.0 eMMC 4.5 / 5.0 / 5.1 |
- Gallery
- Video
- Download
A Dedicated Analyzer for eMMC and SD 3.0
Bus Expert II is a dedicated analyzer for eMMC and SD storage interfaces, for engineers testing command, clock and data activity between a host and its storage device. Bus Expert II provides 32 channels with 2Gb of memory depth per channel, 64 Gbits in total, and supports SD 3.0 and eMMC 4.5, 5.0 and 5.1. Its eMMC decoding covers the CLK, CMD, DATA0 to 7 and DS lines at up to 208MHz.
Probing uses the P300ST active probe with auto calibration, and Bus Expert II probe levels cover 1.2V, 1.8V and 3.3V signalling. If storage is one bus among several on your board, the LAP-F1 series with its optional eMMC 5.1 / SD 3.0 support is the alternative. CE, FCC and RoHS documents for Bus Expert II are available as downloads for supplier qualification.




