High-Speed Signal Adapters
FM00013422
The High Speed Adapter Kit is a high-performance accessory engineered to enhance signal integrity during connections between logic analyzers and high-speed digital systems. By optimizing the adapter's circuitry, it effectively suppresses noise and overshoot common in high-frequency measurements. This ensures waveform fidelity for signals exceeding 200MHz, making it an ideal solution for precise timing analysis and advanced protocol debugging.
Professional Solution for Optimizing High-Speed Digital Signal Integrity
When measuring high-speed buses—such as QSPI, SDIO 4.0, or high-speed parallel interfaces—traditional probe leads often introduce signal distortion due to parasitic inductance. The High Speed Adapter Kit is specifically designed to address these challenges by providing a comprehensive impedance matching and noise suppression mechanism. This kit enables engineers to shorten the measurement path and stabilize logic level transitions through its specialized internal circuitry. By significantly reducing bit error rates (BER), it allows logic analyzers to capture digital waveforms that are closest to the actual physical layer, even at maximum sampling rates, thereby streamlining the debugging process.
Features
- Superior Signal Integrity: Optimized for high-frequency signals to drastically reduce reflections and overshoot.
- High-Speed Sampling Support: Ensures accurate logic level detection at operating frequencies of 200MHz and beyond.
- Low Parasitic Loading: Minimal capacitive and inductive loading minimizes interference with the original signals of the Device Under Test (DUT).
- Robust & Compact Design: Professional-grade PCB layout and high-quality connectors ensure stable and repeatable measurement connections.
- Plug-and-Play Compatibility: Fully compatible with various logic analyzer probes for easy setup and immediate testing.
Key Specifications
- Kit Components: High-speed adapter mainboard and relevant connection accessories.
- Operating Frequency: Supports high-speed digital signal environments exceeding 200MHz.
- Signal Optimization: Built-in impedance adjustment circuitry to enhance waveform quality.
- Interface Type: Standard pin-header interfaces, compatible with various test probes.
Applications
- High-Speed Bus Analysis: Ideal for measuring interfaces like SDIO, QSPI, and NAND Flash.
- Embedded System Debugging: Resolves signal distortion issues from high-performance MCU / FPGA outputs.
- Signal Quality Validation: Useful for detecting setup / hold time violations and crosstalk / noise interference.
- Telecom R&D: Applied in the development and testing of high-speed digital circuits in network equipment and servers.
Specifications
| Item | High-Speed Signal Adapters |
| Channels | 16 Pin + 2 CLK Pin, each cable is with Signal wire (color) and GND wire (black). |
| Bandwidth Support | Optimized for > 200MHz high-speed signals |
| Real-time Sample Rate | - |
| Voltage Range | - |
| Trigger Source | - |
| Trigger Mode | - |
| Auto Measurements | - |
| Interface | - |
| Power Source | - |
| Target Device | LAP-C Pro |
| Function | Enhances signal integrity & reduces noise |
| Connection | Standard Pin Header / Adapter Board |
| Contents | High Speed Adapter PCB, Connection Cables |
| Dimensionsf | 25 cm |
| Weight | 50g |
High Speed Adapter Kit Compatibility for LAP-C Pro
At high sample rates, how signals reach the analyzer matters, so the High Speed Adapter Kit gives LAP-C Pro a 16 + 2 channel shielded logic probe: 16 signal pins and 2 clock pins, each cable carrying a signal wire and a ground wire, 25cm long.
With a 32-channel LAP-C Pro it supports 16 channels at a 1 GHz sample rate or 8 channels at 2 GHz, so decide which signals need 2 GHz timing before wiring. The kit is listed as a compatible add-on for the LAP-C Pro 32256M; the LAP-C Pro 32064M and 32128M are the other 32-channel models. For LAP-C and LAP-B analyzers, compare the test clips instead.




