Ethernet MII Module

MII access for Ethernet and EtherCAT decoding

Ethernet Packet Monitoring Modules - Accurate side-by-side analysis, all important network data at a glance.
  • Ethernet Packet Monitoring Modules - Accurate side-by-side analysis, all important network data at a glance.

Ethernet Packet Monitoring Modules

FM00013428

Ethernet Modules

Ethernet Module is a specialized hardware accessory designed to bridge the gap between Ethernet networks and logic analyzers. Supporting MII interfaces and 10/100Base-TX standards, it enables seamless signal capture and protocol decoding for embedded network debugging.

Bridging the Gap: Precision Ethernet Analysis

In the fast-paced world of embedded systems and IIoT development, Ethernet connectivity is the backbone of innovation. However, troubleshooting the physical and data link layers—specifically the MII (Media Independent Interface)—can often become a bottleneck for engineering teams.

The ZEROPLUS Ethernet Module is engineered to eliminate this friction. By providing a seamless hardware bridge between the logic analyzer and your target system, it transforms raw 10/100Base-TX signals into actionable data. Featuring dual RJ45 connectors for effortless serial monitoring, this module allows developers to:
● Visualize the Invisible: Gain immediate insight into MII signal timing and register configurations.
● Accelerate Debugging: Transition instantly from physical waveform capture to high-level protocol decoding (TCP/IP, UDP, etc.).
● Ensure Design Integrity: Validate hardware performance against IEEE 802.3 standards early in the R&D cycle to prevent costly post-production fixes.

Features
  • Dual-Port MII Connectivity: Equipped with two standard RJ45 sockets, enabling non-intrusive serial monitoring and direct signal tapping for MII (Media Independent Interface) analysis.
  • High-Speed Standard Support: Fully compatible with 10Base-T and 100Base-TX Ethernet, ensuring reliable performance across a wide range of embedded and networking applications.
  • Protocol-Level Integration: Designed to work seamlessly with ZEROPLUS logic analyzers for real-time decoding of TCP/IP, UDP, ICMP, and HTTP packets.
  • Compact & Portable Form Factor: A lightweight (130g), plug-and-play hardware module that simplifies complex field testing and lab debugging.
Key Specifications
  • Interface: MII (Media Independent Interface) Support
  • Ethernet Standard: 10/100Base-TX Compatibility
  • I/O Ports: Dual RJ45 Ethernet Connectors
  • Form Factor: Compact 125 x 92 x 26 mm Hardware Module
  • Net Weight: 130g Portable Design
  • Integration: Seamlessly bridges Logic Analyzers with Ethernet Physical Layers
Applications
  • Industrial Automation (IIoT): Debugging communication issues in PLCs, industrial gateways, and sensors that rely on 10/100M Ethernet for reliable data exchange.
  • Embedded System Development: Validating MII interface timing and signal integrity during the prototyping phase of new networking hardware.
  • Network Equipment R&D: Testing and verifying the firmware/hardware interoperability of routers, switches, and network interface cards (NICs).
  • Telecommunications: Analyzing low-level packet transmission to ensure compliance with IEEE 802.3 standards.
  • Automotive Ethernet (Entry-level): Assisting in the development of vehicle-to-everything (V2X) communication modules that utilize standard MII interfaces.
Specifications
Item Ethernet Packet Monitoring Modules
Bandwidth Supports 10/100 Mbps Ethernet
Real-time Sample Rate Depends on the connected Logic Analyzer
Voltage Range ± 20V (1:1), ± 200V (10:1), ± 2000V (100:1)
Trigger Source Ethernet Packets / MII State (Via Software)
Trigger Mode Protocol Trigger / Pattern Trigger
Auto Measurements Protocol Decoding (TCP, UDP, IP, ICMP, etc.)
Interface MII (Internal) / 2 x RJ45 (External)
Power Source Bus-powered via Logic Analyzer (No external power required)
Dimensions 125 x 92 x 26 mm
Weight 130g
Video

LAP-C Ethernet Module Unboxing




Ethernet MII Module Configuration for 10/100 Links

The Ethernet module connects a Zeroplus logic analyzer directly to an Ethernet link at its RJ45 connectors and provides an MII interface for 10Base-T and 100Base-TX, so a link between two devices can be tapped at the cable rather than probed on the board.

The module serves two decoders. MII decoding shows data, address and status on the MAC/PHY interface, and EtherCAT decoding requires the Ethernet module and reads 15 MII lines: TX/RX clock, error and data lines, TX_EN, RX_DV and COL. Those lines take most of a 16-channel analyzer, so before ordering, check that your analyzer model is compatible with the module and has enough free channels for any other signals you capture.