40 Channels High Speed Logic Analyzer
LAP-F140512M | FM00006147
40-Channel, 512M Per-Channel Memory Depth, Multi-Bus Synchronous Measurement
The 40-channel High-Speed Logic Analyzer: Engineered for synchronized multi-bus measurement and long-term data tracking in advanced digital system debugging.
The LAP-F140512M features a robust 40-channel architecture and 512M per-channel memory depth, significantly reducing signal distortion while delivering high-precision measurements up to 2GHz. Equipped with next-generation active probes and exclusive USB 3.0 lossless streaming, it enables massive data storage directly to your hard drive for up to 800 hours. This ensures engineers can reliably capture high-speed signals, trace anomalies over extended periods, and maximize efficiency in multi-channel problem localization.
CCIR656 High-Speed Video Signal Measurement and Decoding Anomaly
Measurement Description
- Case Background: Involves signal integration in a vehicle multimedia system.
- Target Signal: High-speed CCIR656 signal (148.5MHz / 1.8V).
- Anomaly: The customer found that the system worked normally with a single signal source, but an anomaly (NG) occurred after the image mixing (Mix) process.
- Problem Analysis: Initial measurement showed extreme instability in signal arrival time and clock cycle, leading to the inability to obtain stable triggering and correct decoding results.
Problem Resolution
Custom Trigger Level (Vth) Adjustment:
● Used the LAP-F1 paired with the P300ST probe.
● Precisely adjusted the trigger level of each probe for high-speed, low-voltage signals to overcome noise interference.
I/O Delay Adjustment:
● Used the main unit's built-in I/O Delay function to fine-tune the clock sampling point.
● Manually corrected the Setup/Hold Time between Data and Clock, successfully obtaining a stable signal similar to a clear eye diagram.
Multi-Channel Synchronous Monitoring:
● Leveraged the LAP-F1's advantage of up to 40 channels.
● Simultaneously measured two sets of CCIR656 signals to cross-compare the waveforms before and after mixing.
Features
- 40-Channel Architecture: Ideal for synchronized multi-bus measurement and mid-to-high complexity digital debugging.
- 512M Per-Channel Memory Depth: Balances the need for synchronized observation with long-duration data tracking.
- 2GHz Internal Timing Sampling: Maximizes high-speed signal capture capabilities for precision analysis.
- Next-Generation Active Probes: Significantly reduces signal distortion on the Device Under Test (DUT).
- USB 3.0 Lossless Streaming: Enables massive data streaming directly to storage for uninterrupted recording.
- Comprehensive Protocol Support: Free access to over 130 bus protocol decoders.
- Advanced Hardware Triggering & ZP-Logic Software: Enhances troubleshooting efficiency and anomaly localization.
Applications
- Embedded System Development: Simultaneously monitor UART, SPI, and I2C across multiple channels to analyze the complex interactions between Microcontrollers (MCUs) and peripheral devices.
- Industrial Automation & Control: Ensure real-time precision and reliability in automated production lines by verifying industrial-grade protocols such as ModBus, PROFIBUS, and EtherCAT.
- Automotive Electronics & Telematics: Combine CAN 2.0B, FlexRay, and LIN protocols for long-term stability monitoring of In-Vehicle Infotainment (IVI) systems.
- Semiconductor & High-Speed Storage Testing: Utilize dedicated eMMC 5.1 and SD 3.0 probes to perform rigorous timing verification of storage controllers in HS400 mode.
- Power Management Analysis: Leverage PMBus and SMBus protocols to monitor complex Power Distribution Networks (PDN) and management logic on server motherboards.
- Smart Home & IoT R&D: Support 1-Wire, Infrared (IR), and other specialized protocols to facilitate the development of low-power sensors and intelligent remote control systems.
Specifications
| Sampling Rate | ● Internal (Timing) (Asynchronous): 2 GHz (Max) ● External (State) (Synchronous): 200 MHz (Dual-edge) |
| Active Probes / Signals | P120LV ● DUT Bandwidth (Max.):120 MHz ● Channels (Max.):Data 64 ch ● Signal Type:Single-Ended Bus ● Input Impedance / Capacitance:190 Kohm ± 10% / 4.3 pF ±2 pF ● Bus Voltage:VIH:0.6V - 5V ● Input DC Voltage (Max.):± 10V P300ST (Based: 1 ch (CLK). Other options) ● DUT Bandwidth (Max.):200 MHz ● Channels (Max.):Data 32 ch ● Signal Type:Single-Ended Bus ● Input Impedance / Capacitance:190 Kohm ± 10% / 4.3 pF ±2 pF ● Bus Voltage:VIH:0.6V - 5V ● Input DC Voltage (Max.):± 10V |
| Memory | Memory Depth Per Channel (Bits) / Channels 4M / 64 ch 8M / 32 ch 16M / 16 ch 32M / 8 ch 64M / 4 ch 128M / 2 ch 256M / 1 ch 64M / 64 ch 128M / 32 ch 256M / 16 ch 512M / 8 ch 1G / 4 ch 256M / 64 ch 512M / 32 ch 1G / 16 ch 512M / 64 ch 1G / 32 ch |
| Trigger | ● 6 protocol triggers (hardware) (serial):I2C, I2S, SPI, SVID, UART (RS-232C/422/485), CAN 2.0B ● Trigger types:Pattern / Edge / Pulse-Width / Interval ● Trigger channels:64 ● Trigger delay:Yes ● Trigger levels:256 ● Trigger pass:1-65535 |
| Operating System | Windows (11/10/8.1/7) |
| Special Software Features | ● Zooming and panning ● Waveform and UI Customization ● State list and Waveform view ● Packet list ● Waveform Navigator ● Memory view ● Statistic ● File Comparison |
| Phase Error | < 3ns |
| Power Supply | AC (IN):100 ~ 240V, 50 ~ 60Hz DC (OUT):9V / 5.55A |
| Certifications | FCC / CE / WEEE / RoHS / REACH |
- Gallery
- Video
- Download
-
When 40 Channels and 512M Memory Fit
The LAP-F140512M is the LAP-F1-40 model with 512M bits of memory per channel, the largest LAP-F1 memory option. Its 40 channels sample at up to 2 GHz in timing mode and 200 MHz (dual-edge) in state mode, and the LAP-F1-40 lists more than 130 built-in protocol decoders. Six hardware trigger protocols, I2C, I2S, SPI, SVID, UART and CAN 2.0B, start a capture on a decoded event rather than a raw edge, which helps when a fault follows one particular transaction.
The LAP-F1-40 base purchase includes 20 P120LV probes and one P300ST as the clock-input probe. For faults that appear only after long runs, LAP-F1-40 long-time recording streams over USB 3.0 to a hard drive, from 7 hours up to a month. Before ordering, decide on the optional LAP-F1 eMMC 5.1 / SD 3.0 support, and if your signal count exceeds 40, compare the LAP-F1-64 with 512M per channel.


