64-Channel Advanced Logic Analyzer
LAP-F164256M | FM00006156
256M Per-Channel Memory Depth, The Perfect Balance of High-Density Monitoring and Massive Data Capacity.
The 64-Channel Advanced Logic Analyzer stands as a perfectly balanced model, integrating 64-channel synchronous monitoring with a 256M per-channel memory depth. By maintaining a high-density channel count while offering ample data logging capacity, this configuration is ideal for applications requiring extended signal observation without the need for extreme memory depths. It empowers engineers to achieve an optimal equilibrium between multi-signal comparison and timing analysis, facilitating high-efficiency localization of erratic behavior in complex digital systems.
Analysis of Intermittent Audio Dropouts and Pops / Clicks in I2S Audio
Measurement Description
- System Architecture: PC (USB output) → USB to I2S IC → I2S to Codec IC → Audio Output.
- Anomaly: The two ICs developed by the customer randomly experience audio dropouts or pops/clicks after about 30 minutes of playback.
- Difficulty: The fault is random and occurs relatively late, making it difficult to capture the anomalous waveform with traditional short-duration sampling.
Problem Resolution
LLTR (Lossless Long Time Record):
● Enabled the LLTR feature on the LAP-F1.
● Streamed and recorded the long-duration I2S digital audio data directly onto the computer's hard drive.
Time Point Retrospective Analysis:
● Stopped recording immediately when the dropout or pop/click was audible.
● Used the software timeline to trace back to the point of the anomaly.
● Inspected the I2S's BCLK, LRCK, and Data signals for phase shifts or missing data.
● Successfully pinpointed the logic error in the IC processing end.
Features
- 64-Channel Synchronous Monitoring: Engineered for high-pin-count components and parallel observation of multiple buses.
- 256M Memory Depth: Provides the perfect balance between high-density channel count and extensive recording capacity.
- Advanced Hardware Triggering: Enables rapid localization of specific events and critical timing points.
- Comprehensive Protocol Support: Free access to over 130 bus protocol decoders for versatile analysis.
- Up to 2GHz Internal Timing Sampling: Maximizes high-speed signal capture and timing resolution.
- Next-Generation Active Probes: Significantly enhances measurement stability and signal integrity for high-speed signals.
- ZP-Logic Software Integration: Facilitates multi-signal synchronous analysis and deep packet-level observation.
Applications
- Automotive Electronics & Telematics: Combine CAN 2.0B, FlexRay, and LIN protocols for long-term stability monitoring of In-Vehicle Infotainment (IVI) systems.
- Embedded System Development: Simultaneously monitor UART, SPI, and I2C across multiple channels to analyze complex interactions between Microcontrollers (MCUs) and peripheral devices.
- Semiconductor & High-Speed Storage Testing: Utilize dedicated eMMC 5.1 and SD 3.0 probes for rigorous timing verification of storage controllers in HS400 mode.
- Power Management Analysis: Leverage PMBus and SMBus protocols to monitor complex Power Distribution Networks (PDN) and management logic on server motherboards.
- Industrial Automation & Control: Ensure real-time precision and reliability in automated production lines by verifying industrial-grade protocols like ModBus, PROFIBUS, and EtherCAT.
- Smart Home & IoT R&D: Support 1-Wire, Infrared (IR), and specialized protocols to facilitate the development of low-power sensors and intelligent remote control systems.
Specifications
| Sampling Rate | ● Internal (Timing) (Asynchronous): 2 GHz (Max) ● External (State) (Synchronous): 200 MHz (Dual-edge) |
| Active Probes / Signals | P120LV ● DUT Bandwidth (Max.):120 MHz ● Channels (Max.):Data 64 ch ● Signal Type:Single-Ended Bus ● Input Impedance / Capacitance:190 Kohm ± 10% / 4.3 pF ±2 pF ● Bus Voltage:VIH:0.6V - 5V ● Input DC Voltage (Max.):± 10V P300ST (Based: 1 ch (CLK). Other options) ● DUT Bandwidth (Max.):200 MHz ● Channels (Max.):Data 32 ch ● Signal Type:Single-Ended Bus ● Input Impedance / Capacitance:190 Kohm ± 10% / 4.3 pF ±2 pF ● Bus Voltage:VIH:0.6V - 5V ● Input DC Voltage (Max.):± 10V |
| Memory | Memory Depth Per Channel (Bits) / Channels 4M / 64 ch 8M / 32 ch 16M / 16 ch 32M / 8 ch 64M / 4 ch 128M / 2 ch 256M / 1 ch 64M / 64 ch 128M / 32 ch 256M / 16 ch 512M / 8 ch 1G / 4 ch 256M / 64 ch 512M / 32 ch 1G / 16 ch 512M / 64 ch 1G / 32 ch |
| Trigger | ● 6 protocol triggers (hardware) (serial):I2C, I2S, SPI, SVID, UART (RS-232C/422/485), CAN 2.0B ● Trigger types:Pattern / Edge / Pulse-Width / Interval ● Trigger channels:64 ● Trigger delay:Yes ● Trigger levels:256 ● Trigger pass:1-65535 |
| Operating System | Windows (11/10/8.1/7) |
| Special Software Features | ● Zooming and panning ● Waveform and UI Customization ● State list and Waveform view ● Packet list ● Waveform Navigator ● Memory view ● Statistic ● File Comparison |
| Phase Error | < 3ns |
| Power Supply | AC (IN):100 ~ 240V, 50 ~ 60Hz DC (OUT):9V / 5.55A |
| Certifications | FCC / CE / WEEE / RoHS / REACH |
- Gallery
- Video
- Download
-
LAP-F1-64 With 256M per Channel and Memory Folding
The LAP-F164256M pairs the 64 channels of the LAP-F1-64 with 256M bits per channel, between the 64M and 512M configurations. LAP-F1-64 sampling reaches 2 GHz in timing mode and 200 MHz (dual-edge) in state mode, and six hardware trigger protocols (I2C, I2S, SPI, SVID, UART and CAN 2.0B) start captures on decoded events. LAP-F1 eMMC 5.1 and SD 3.0 support is an option to specify when ordering.
On the LAP-F1-64, folding raises this configuration to 512M per channel at 32 channels or 1G at 16 channels, so one unit can serve wide captures and longer, narrower ones. When an event interval exceeds on-board memory, long-time recording streams to a hard drive over USB 3.0 instead. Compare the 64M memory option if your captures are short, or the 512M deep-memory option if capture length at full width decides the purchase.


